Hensotherm Spachtel Universal
Fire protection sealing compound for joint seals and service penetrations.
HENSOTHERM® Spachtel - Universal - has a general building inspectorate approval and is approved by the German Institute for Building Technology (DIBt), Berlin under Z-19.11-2110. Additional the material is fully tested according to EN 1366-3 for penetration seals and EN 1366-4 for linear joint seals.
Seals service penetrations in solid floors (≥ 150mm thickness), solid walls and lightweight partition walls (≥ 80 mm thickness).
Seals linear...
Fire protection sealing compound for joint seals and service penetrations.
HENSOTHERM® Spachtel - Universal - has a general building inspectorate approval and is approved by the German Institute for Building Technology (DIBt), Berlin under Z-19.11-2110. Additional the material is fully tested according to EN 1366-3 for penetration seals and EN 1366-4 for linear joint seals.
Seals service penetrations in solid floors (≥ 150mm thickness), solid walls and lightweight partition walls (≥ 80 mm thickness).
Seals linear joints in solid walls (≥ 100 mm thickness) en floors (≥ 150 mm thickness) with a joint width up to 40 mm.
- For indoor application
- Building material class B2 according to DIN 4102, Part 1
- Building material class E according to DIN EN 13501-1
- Creates a thick layer of foam when heated
- Free of silicone and solvents
- Colour: grey / can be painted
- No VOC emissions
- Made in Germany – TÜV NORD CERT Standard A75-S018 certificate registration no. 44 771 130042
- Emission class A+
Joint seals:
- Linear joint seals in walls and floors made from concrete (aerated, reinforced etc.) all in accordance with EN 1366-4, thickness walls ≥ 100 mm, floors ≥ 125 mm.
Penetration seals:
- single electrical conduits without insulation such as electricity and telephone cables, fibre optic cables, IT leads etc.
- single pipes with or without insulation such as:
- non-combustible pipes with outer diameter ≤ 160 mm (e.g. made of cast iron, copper, steel)
- combustible pipes with outer diameter ≤ 32 mm (e.g. made of plastic, but also aluminium and glass)
- pipes with combustible coating with outer diameter ≤ 160 mm